Cattle Gate In Frame

More Pictures

Cattle gate-in-frame panels have four options to suit the Allrounder, Yardsman, Studman and Cowboy cattle panels in the portable fencing range. Measuring up to 2.5 m wide, these cattle gates are strong and sturdy enough to withstand the pressure of working stock in a portable yard. Tall enough for people to pass through with a height of 2.25 m, they weigh from between 61 kg up to 95 kg depending on the model.

Configure Your Product Options Below To Get A Quote Today

* Required Fields


Options to suit Clipex panels

Cattle gate-in-frame panels come in four options, and each has a different level of protection against stock bruising. The Allrounder has square galvanised pipe cross rails where the Yardsman has oval galvanised pipe to give greater protection from bruising. Select the premium option, the Studman, for great bruise ratings. Made from elongated galvanised oval pipe they form large, easy to see cross rails. The fourth option is the Cowboy cattle gate-in-frame panel. Built to withstand super tough conditions, the cross rails are galvanised steel tube, tough enough to last a lifetime.

Put together in a snap

Super simple and quick to put together, Clipex® double gate-in-frame panels are wide enough to drive a mob of cattle through into the holding yard while working stock away from home. All options have two sets of double lugs welded to each side of the panel for inserting cattle pins to join the panels together. It takes seconds to drop the cattle pins into the lugs on each panel ready for instant use. The Yardsman, Studman and Cowboy gates come standard with a chain and slam latch

Allrounder Gate Allrounder Double Yardsman Gate Yardsman Double Cowboy Gate Cowboy Double Studman Gate Studman Double
Style Allrounder Allrounder Yardsman Yardsman Cowboy Cowboy Studman Studman
Total width 2455mm 4654mm 2455mm 4578mm 2475mm 4598mm 2475mm 4598mm
Pin to pin width 2411mm 4610.5mm 2405mm 4528mm 2421mm 4548.5mm 2421mm 4548.5mm
Internal width 2225mm 4424mm 2225mm 4348mm 2225mm 4348mm 2225mm 4348mm
Weight 61kg 122kg 71kg 142kg 94kg 188kg 91kg 182kg
Top rail Height 2234mm 2234mm 2234mm 2234mm 2170mm 2234mm 2170mm 2234mm
Internal Height 2134mm 2134mm 2134mm 2134mm 2114mm 2134mm 2114mm 2134mm
Ground to Bottom Lug Dist. 30cm 30cm 30cm 30cm 30cm 30cm 30cm 30cm
Bottom to Top Lug Dist. 119cm 119cm 119cm 119cm 119cm 119cm 119cm 119cm
Pin size 16mm 16mm 16mm 16mm 16mm 16mm 16mm 16mm
Pack size 5 5 5 5 5 5 5 5
Internal rail type 40x40 Tube 40x40 Tube 71 Oval 71 oval 60 OD Pipe 60 OD Pipe 120 Oval 120 Oval
Frame rail type 40x40 Tube 40x40 Tube 50x50 tube 50x50 tube 60 OD pipe 50x50 Tube 50x50 Tube 50x50 Tube
Steel Coating Pre-Gal Tube Pre-Gal Tube Pre-Gal Tube Pre-Gal Tube Hot Gal PIPE Hot Gal PIPE Pre-Gal Tube Pre-Gal Tube
Cattle Rail Comparison

Made with 40 x 40 SHS. The Allrounder range is ideal for the budget conscious, but suitable for most stock applications.

The Yardsmen range uses 71 x 44 oval tube. An ideal balance of strength, cost, visibility and anti- bruise properties.

The best anti-bruising and highest visibility in the range. The 120 x 40 Studman range is design with stock safety in mind.

Overkill for most applications, the Cowboy range won’t let you down. 60 OD heavy wall pipe is nearly unbreakable.

Bruise Rating

The bruise rating is how likely the panel is to cause bruising to the animal when under pressure. An excellent rating is far less likely to cause bruising than an average rating.


The strength comparison is measured by how much force a single rail can take in the horizontal direction before permanent deformation. (Simulating stock pressure in the middle of the panel)


The visibility is the percentage of area the panel covers. Higher visibility means calmer cattle and better stock flow.


Weight of a total cattle panel. Heavier panels are less likely to move under stock pressure, but are less portable.

Related Products