Don’t waste your time tying off wire to fence posts. Clip your wire into the posts with Clipex fencing. Competitions at field days consistently show that it’s 12 times faster to clip-in compared to tying off tie wire. Get your fence up quicker and spend more time fishing with your kids. Unless they’re grounded. Then just put up some more fences instead.


If you think bending over for 10 seconds to tie your shoe lace is uncomfortable, imagine having to stay bent down for 1hr and 4 minutes! That’s what it takes to tie off a bottom plain wire per km of standard fence. No wonder your back’s sore. With Clipex, it’d take just 5 minutes and 25 seconds!


Don’t be fooled, saving 50% on materials doesn’t add up if you have to replace the fence twice as often. You’ll spend twice the labour on an inferior fence! A Clipex fence saves labour, maintenance and material costs (no tie wire). It’s also one of the toughest available, so instead of having to replace it down the track, you can buy that new fishing boat instead.

Australia wide servicing and installation

With our hard working staff stationed across Australia we offer excellent support and service no matter where you are. We also offer nationwide servicing and installation with a dedicated team of service & installation technicians.

Gives us a call today to find out more!

Premium Galvanising

Clipex products use only the best galvanising methods. Many of our products and all of our permanent stockyards are built using hot dip galvanised materials, ensuring excellent longevity.

Zinc (Zn) is a self sacrificing coating which prevents rust from corroding steel quickly. The more zinc present, the longer the life span of the steel. Hot dip galvanisation expands on this by bonding with the material, not only creating a thick zinc outer layer but also creating a bonded zinc inner layer (Zn-Fe), making it extremely difficult to remove. Hot dip galvanising has approximately 600% more bonding strength than zinc rich paint.

Designed with purpose and strength

We design products carefully to create real solutions utilising our patented mechanisms and materials. We manufacture our products out of high quality steel to meet and exceed Australian standards. 

We also offer custom stockyard designs to maximise flow and usability on your land with your animals.



Damon Soster

NSW – Dalkeith Old

Frank McKillop


Jack Glasson


Will Roberts


[tf_numbers name=”211945″]

[tf_numbers name=”212199″]

[tf_numbers name=”front-page-numbers”]

What is Clipex®?

Clipex® started in 2007 when the Olsson family invented a patented clip inside a fence post. Since then it has evolved into a complete fencing system. From the end strainers, to the wire and fence posts, we’ve developed a system that’s designed to work together. Our goal is to deliver to farmers an entire fence that is stronger, easier and significantly faster to erect.

How does the clip work?
Our fence posts are made with special slots at the ideal intervals along the post. We then rivet a small pin and keeper assembly to each slot in our factory. This clip assembly enables a fencing wire to be clipped into the post in the blink of an eye, but the orientation of the keeper and pins prevent the wire from coming out.
Will the clips corrode?
The pins that hold the clip are made from stainless steel and the clip itself is coated with a proprietary aluminium to avoid any electrolysis between the fencing wire and the clip.
What makes up the system?
Clipex Stayfast® end assemblies have a heavy duty ground anchoring system able to hold a large number of high tensile wires. They’re purposely designed for the Clipex® TUFF knot pre-fabricated wire. This wire features the toughest knots available, a single vertical picket wire and lots of high tensile line wires that line up perfectly with the clips on the Y posts.
How strong is the Clipex® system?
One of the unique features of Clipex® is the ability to easily attach pre-fabricated wire to the post. Traditionally, pre-fab wire fences use several plain salvage wires, which are then tied to the mesh of the salvage wire in only 2 or 3 places. This allows the fence to bow in the middle. With Clipex® the wire and posts are designed for each other, so you can attach at least 6 line wires directly into the post with ease, creating a sturdier fence without the need for salvage wires.
How tough are the clips?
When fencing wire is attached to a Clipex® post, it’s held inside the slot in the post. As such, the post does most of the work holding the wire, making it nearly impossible to damage the clip assembly without bending the post or breaking the wire first.
Does it weaken the Post?
Some of our posts have slots close to the ground which can weaken the post in bending. To overcome this weakness, a patented bracing strap or backing plate is welded to the post at ground level to increase the strength of the post.
Is it difficult to use?
The Clipex® mechanism is so simple to use that even children can immediately attach fencing wire just as securely as an experienced fencing contractor. There are no fiddly extra parts to buy, carry or lose. Because the wire attaches to the post so easily, care should be taken to avoid accidentally clipping wires in.
Can the wire be un-clipped?
Wire can be unclipped by manually rotating the clip up and pulling the wire out. This allows wire to be easily pulled out and recycled, or pulled out and re-strained.
Can the clips be damaged?
The pins are solid stainless steel, and are riveted to the post with a 10 tonne punch and are extremely difficult to damage. The entire clip assembly sits inside the confines of the post, so they won’t get in the way while being driven into the ground.
Do the posts twist or split?
In 2010 Clipex® developed a new method for making Y Bar. We make all our Y bar in our own factory with the highest quality materials. The points are cropped symmetrically to avoid twisting while being driven into the ground. We even add a bead of weld to the top of every post to help prevent splitting when being driven into rocky ground with a pneumatic driver.
Does Clipex® make bigger posts?
There are 2 versions of Clipex® posts. Clipex® Standard posts, which are a similar size to traditional posts, and the Clipex Beefy® Posts which are much larger and designed to be a replacement for timber intermediate posts.
Is there electric fencing?
We make a custom electric insulator that has a stainless steel pin inside it which clips into our posts like a fencing wire would . Any third party insulators can also be attached as there is a normal hole in the post above each clip assembly, with the exception of the top clip.
How much does it cost?
Due to price fluctuations and differing freight costs, we don’t display our prices online. Please contact us for an obligation free quote. However, in most cases you’ll find that we are cheaper than competing products that are usually inferior. We’re able to do this because we are vertically integrated, manufacturing and selling our own products direct.
Where can I buy it?

You can buy Clipex products direct from any of our branches across Australia. We also partner with excellent logistics companies to arrange delivery to your farm, or local freight yard. 

See our Contact Us page for more details

Galvanised 165cm 5 Slot Post

Galvanised 165cm 5 Slot Post

Have no product in the cart!